{"id":8232,"date":"2023-12-14T05:52:41","date_gmt":"2023-12-14T05:52:41","guid":{"rendered":"https:\/\/safeglassforschools.com\/?post_type=code-considerations&p=8232"},"modified":"2024-01-09T13:55:07","modified_gmt":"2024-01-09T05:55:07","slug":"code-faqs","status":"publish","type":"code-considerations","link":"https:\/\/safeglassforschools.com\/code-considerations\/code-faqs\/","title":{"rendered":"Code FAQs"},"content":{"rendered":"\n
<\/div>\n\n\n\n

Click here<\/a> to view the Code Related FAQs as a pdf.<\/p>\n\n\n\n

<\/div>\n\n\n\n

What are the code requirements in a 1-hour exit corridor?<\/h3>\n\n\n
\n
\"\"<\/a><\/figure><\/div>\n\n\n

The codes allow 20-minute fire doors with 20-minute vision panels without hose stream in 1-hour exit corridors. Sidelites and transoms around the door in a 1-hour exit corridor require a 45-minute fire rating with hose stream.  Fire windows are required to be rated 45-minutes, and are limited to under 25% of the total wall area.  If more window glazing is desired, fire-resistive glazing assemblies rated equal to the wall must be used. READ MORE\u2026.<\/a><\/p>\n\n\n\n

<\/div>\n\n\n\n

What are the code requirements for 1- and 2-hour exit\/stairwell enclosures?<\/h3>\n\n\n\n

The codes specify extra<\/em> fire protection levels for fire doors and glazing products in exit enclosures and passageways, in order to protect occupants exiting a burning building from smoke, flames and<\/em> exposure to dangerous radiant heat. Fire protective glazing in temperature-rise 60- or 90-minute doors in an exit enclosure or passageway is limited to 100 sq inches. Larger door vision panels, sidelites, transoms and wall glazing surrounding the door must<\/em> be fire resistive. The framing used must also be fire resistive, and the whole assembly must meet the same rating requirement as the wall. READ MORE\u2026<\/a><\/p>\n\n\n\n

<\/div>\n\n\n\n

In a sprinklered building, can you increase the size of the door vision panel in an exit\/stairwell enclosure?<\/h3>\n\n\n\n

No. In the 2000 IBC, an exception was provided that allowed the use of non-temperature rise doors if a building was fully sprinklered in accordance with Chapter 9. The 2012 IBC was amended to clarify that the maximum allowable vision panel in a 60- or 90-minute, temperature-rise door in an exit enclosure or passageway is 100 sq inches, regardless of whether the building is fully sprinklered or not. The only way to increase the size of a vision panel in a 60- or 90-minute door in an exit\/stairwell enclosure is to use fire resistive glazing.<\/p>\n\n\n\n

<\/div>\n\n\n\n

Why do codes sometimes require sidelites and transoms to have higher ratings than door openings?<\/h3>\n\n\n\n

When the code requires fire doors rated 1-hour or more, then the sidelites and transoms around that door must be fire resistive and rated to the same standard as the wall. Sidelites and transoms around a 20-minute fire door in a 1-hour exit require a 45-minute fire rating with hose stream. Doors are actively opened and closed and have limited surface areas. Fixed panels, however, can possibly have combustibles stored against them, which could ignite from high levels of radiant heat. READ MORE\u2026<\/a><\/p>\n\n\n\n

<\/div>\n\n\n\n

What are the code requirements for fire rated framing?<\/h3>\n\n\n\n

Because fire rated glazing is used in door- and wall-assemblies, code requirements for framing must also be considered. Simply put, the fire rated framing requirements must match the glazing requirements in order for the assembly to fully meet the code requirements. Hollow metal framing is fire protective, not fire resistive, so where codes require fire resistive glazing, the framing must also be fire resistive, and the entire assembly must meet the same rating requirement as the wall. READ MORE\u2026<\/a><\/p>\n\n\n\n

<\/div>\n\n\n\n

What is the difference between a \u201chazardous location\u201d and
an \u201carea subject to human impact load\u201d?<\/h3>\n\n\n
\n
\"\"<\/a><\/figure><\/div>\n\n\n

These terms are used in the building code to define requirements for safety glazing. \u201dHazardous locations\u201d are specifically defined in the safety glazing chapter (section 2406.1), and include vision panels in doors, sidelites adjacent to doors, and large fixed panels near walking surfaces. \u201dArea subject to human impact load\u201d is broader than the code definition of a hazardous location, and becomes relevant when glazing is used in athletic facilities. READ MORE\u2026<\/a><\/p>\n\n\n\n

<\/div>\n\n\n\n

What is the hose stream test? Why is it required?<\/h3>\n\n\n
\n
\"\"<\/a><\/figure><\/div>\n\n\n

The hose stream test was developed in the late 1890s to measure the structural integrity of floor materials and cast or wrought iron in building walls during an intense fire. It was not intended or designed to test the thermal stress performance of glazing materials. Today, prescriptive building codes in the U.S. and Canada (but not in Europe or elsewhere) require application of fire rated glazing that passes this archaic test, unless a local code authority determines otherwise. READ MORE\u2026<\/a><\/p>\n\n\n\n

<\/div>\n\n\n\n

Can I use one type of fire rated glass for all my applications?<\/strong><\/h3>\n\n\n\n

Architects and designers should be wary about products that are marketed using the fire endurance rating (20 minutes to 3 hours) without any reference to its overall performance or limitations. Why? Because having a one-size-fits-all approach to fire rated glass not only leads to faulty specifications, but also significant expense when fire marshals and building officials order the glass to be changed because the wrong product is installed.<\/p>\n\n\n\n

The current IBC recognizes 2 categories of fire rated glass fire protective and fire resistive.<\/a> These two types of fire rated glass are based on the testing criteria that the product has met, not just the duration rating. Fire protective glass products are tested to NFPA 252\/257 and blocks smoke and flames. They are typically used in 20-45 minute applications and subject to size limitations dictated by code. Fire resistive glass products are tested to ASTM E-119\/NFPA 251\/UL263 and blocks smoke, flames and radiant heat. They are typically used in 60-120 minute applications and are only subject to tested size limitations.<\/p>\n\n\n\n

<\/div>\n\n\n\n

What are my product options for 1 hour exit corridors?<\/strong><\/h3>\n\n\n\n

Generally speaking, exit corridors have a fire resistance rating of 1 hour. Table 716.5 in the 2012 IBC outlines the requirements for door, sidelite and transom assemblies.<\/p>\n\n\n\n

Doors:<\/strong> 20 minute fire protective glass tested without hose stream. Products include specialty tempered<\/a>, safety wired glass<\/a>, filmed ceramics<\/a> and laminated ceramics<\/a>. All these options meet CPSC Cat. I and II impact safety.<\/p>\n\n\n\n

Sidelites: <\/strong>45 minute fire protective glass tested with hose stream*. Products include  45-minute fire resistive intumescent tempered units<\/a>,  specialty tempered<\/a>, safety wired glass<\/a>, filmed ceramics<\/a> and laminated ceramics<\/a>. All these options meet CPSC Cat. I and II impact safety.<\/p>\n\n\n\n

Transoms:<\/strong> 45 minute fire protective glass tested with hose stream*. Products include 45-minute fire resistive intumescent tempered units<\/a>, safety wired glass<\/a>, traditional wired glass, plain ceramics<\/a>, filmed ceramics<\/a>  and laminated ceramics<\/a>.  This application does not require meeting CPSC impact safety requirements.<\/p>\n\n\n\n

Openings: <\/strong>Table 716.6 in the 2012 IBC outlines the requirements for openings in 1 hour exit corridors<\/p>\n\n\n\n